Complete Commercial Rack Mount System
WellAV UMH160 IRD w/1.2M Dish  and NPRM
DVBS / S2 MPEG2 / 4 Commercial Downlink Satellite System for reception of a single Ku-band satellite.

Includes:

• WELLAV UMH160 Commercial Rack Mount Receiver
• GEOSATpro 1.2m offset dish
• NPR-4A Non-penetrating Roof Mount
  
• Neoprene Roof Pad 36"x36"
• GEOSATpro SL1 Bullet Standard type Linear LNBF
• GEOSATpro Installation Supplies Kit

Fixed Shipping Cost within the Continental US only  $135
Please call our Sales Team for additional shipping options.

• Designed and Built to Provide Years of Dependable Reception in Extreme Elements
• Heavy Duty 3 inch Dual U-Bolt Mounting Bracket Suitable for Post or Motor Mounts / Easily inverted for use with top loading motor mounts
• Efficient / High Gain Reflector
• Perfect for Fringe Area Reception of Weak Signals (outperforms Channel Master and all Competitor Designs)
• C-Band LNB mount available C-band LNBF Mount
  
• Durable and Attractive Grey Textured Finish
• Single Box Packaging suitable for Residential Delivery
• Bulk Quantity Pallet Delivery Available

GEOSATpro 1.2M	Competitor
Heavy Duty - Built for Extreme Conditions	Light Duty - Easily Twists & Bends

GEOSATpro 1.2M inverted mount on a dish motor with 55mm Tube

Two units can be shipped together in one shipping box with no increase in freight cost. A carton fee of $20 (carton, packaging, and strapping) is included in the item price. The average cost of shipping is $150 or less to most US addresses. If this item is purchased in bulk, the included $20 shipping carton charge is removed. Bulk orders will be shipped by pallet and a pallet fee of $50 will be applied. Please call for heavy weight freight or international shipping quotes. The individual shipping carton dimensions are 58" x 52" x 9" and weight is 52 lbs. Two dishes can be shipped in one carton with a weight of 78 lbs.

Retail cost for local pickup is $144. with shipping box or $124 without box.

 Shipping and Handling:

Customer is responsible to inspect the goods upon arrival and for immediate claims.
Customer has to mark the claims on the delivery receipt, otherwise they are responsible for the damage. 
SatelliteAV is not responsible for claims that are not reported to the delivery man upon arrival.

SL1 Bullet - The Original and Smallest LNBF in the World 

Standard System Replacement LNBF

For Reception of North American Satellites

FSS 11.70 - 12.20 GHz / LO 10750

The Geosatpro SL1 Bullet LNBF is an exclusive design developed by Satellite AV in 2006 to provide exceptional performance in a micro-sized housing. Other distributors have tried to copy the design, but they can't match the performance. The low noise figure of .4 dB with 60 dB gain are combined in this +/-1MHz frequency stable, quality LNBF. Your customers deserve a stable and trouble-free LNBF! We don't try and fool you into believing that this is a 0.1, 0.2 or 0.3 NR LNBF. The SL1 outperforms other "0.1, 0.2 or 0.3" LNBFs! Compare for yourself and see the difference.

The miniature physical size allows for optimal reception of satellites spaced 4 degrees apart without sacrificing reception quality or reliability. Standard size LNBF designs do not allow for true 4 degree spacing due to their large scaler size. The SL2 Bullet incorporates an internal scalar design within the feedhorn, CAD designed to provide optimal illumination of the GEOSATpro 90cm dish. Tested and verified to outperform the European distributed ALPS and Inverto brands with over 20% gain in Signal Quality!

The GEOSATpro SL1 Bullet LNBF was torture tested through 1000 feet of RG6 coax. Not only did it produce high Signal Levels, but also retained excellent Quality Readings and flawless reception of even the weakest channels on Galaxy 19.

This LNBF is the most reliable "off the shelf" LNBFs that we have ever distributed. Failure rate of less than 1/10th of 1% means less service calls, less RMAs!

Standard LNBFs work with all satellite meters and make installs easier. Perfect for viewing linear satellites in North America.

Technical Specifications
Input Frequency Range	11.70 - 12.20 GHz
L.O. Frequency	10.75 GHz
L.O. Stability	1 MHz (-40 - +70° c)
Ouput Frequency Range	950 - 1450 MHz
Noise	.4 dB typical
Conversion Gain	55 dB typical
Input VSWR	2.5:1
Output VSWR	2.0:1 (max)
Connector	F Type female
Impedence	75 ohm typical
Cross Polar Isolation	20dB (min.)
Image Rejection	45 dB (min.)
Phase Noise	-50dBc @ 1 KHz -75dBc @ 10 KHz -95dBc @ 100KHz
Supply Voltage	Ca: 11. - 14.0 V = Vertical Polarization Cb: 16.0 - 20.0 V = Horizontal Polarization
Operating Temperature	-40 - +70 degrees Celsius
Storage Temperature	-40 - +80 degrees Celsius
Relative Humidity	0 - 95 %
Throat Diameter	40mm
Size	4" x 2" x 2"
Weight	4 ounces

No more repeat trips to the hardware store for installation supplies. The GEOSATpro install supplies kit provides only the highest quality hardware for proper installation of a Glorystar, DirecTV, Dish Network or any MPEG-2 / FTA satellite system. We have carefully chosen only the best grade products for this exclusively manufactured installation supplies kit.

Everything from the fluid filled compass for locating the direction of the satellite, grounding supplies for lightning protection to the silicone sealant for any wall or roof penetrations is included to insure an easy, safe and quality installation. Lag bolts, nylon ties and cable clips secure the dish mounting and cables. UL rated RG6 coax cables with 360 degree radial compression fittings and rubber o-rings provide water resistant seals against the elements. Replacement item for the original DKIT96 kit.

Kit Includes:

• Coaxial Cable 75 Ft. RG6
• Coaxial Cable 25 Ft. RG6
• Coaxial Cable RG6 Jumper 3'
  
• Grounding Wire 10 Ft. 8AWG
• Grounding Block Dual 3GHz
  
• Grounding Strap 6"
• 2 Lag Bolts with Collar 3" x 5/16"
• 4 Lag Bolts with Collar 2" x 5/16"
• 6 Nylon Tie Wraps
• 8 Coax Cable Clips
• 1 Silicone Sealant 15ml
• 1 Compass Liquid Filled

NPR4A Non-Pentrating Roof Mount and Pad

A NPRM (Non-Penetrating Roof Mount) solves the problems associated with flat-roof installations or used as an alternative when a non-permanent installation is required. No permanent holes or mounts are needed to secure the dish into position. Cement blocks or cement premix bags can be used to as ballast to weight  and secure the base. The NPR4A is perfect for GEOSATpro 1.2M dish installations.

The NPR4A base frame is a very heavy duty and well manufactured from 1.25" x 1.25" x 0.188" angle iron and holds up to 8 cement blocks. Base frame and 2 3/8" post features a seven step thermoset powder coat finish to prevent corrosion and rust. The footprint covers approximately 9 square feet of roof space - 36" x 36"

Neoprene Pad 36" x 36" x 1/8"

Protects the roofing material and prevents unwanted movement of the base. We do not recommend the installation of a NPRM without a pad.